An insert, also called an inset or cassette stove, is a closed firebox that is built into an open fireplace or a masonry surround to make much better use of the heat from the wood. All our inserts have a fan and can be ducted, from 6.7 to 8.2 kW, for spaces of up to 80-100 m². They are designed and made in Spain and comply with Ecodesign regulations.
Find out more in fan-assisted fireplaces and in our installation guide.
Nominal heat output
8 kW
Combustion type
Triple
Smoke
flue
Ø 150-153 mm Top
1.989€
Nominal heat output
6.7 kW
Combustion type
Triple
Smoke
flue
Ø 150-153 mm Top
1.479€
Nominal heat output
6.7 kW
Combustion type
Triple
Smoke
flue
Ø 150-153 mm Top
1.619€
Nominal heat output
8.2 kW
Combustion type
Triple
Smoke
flue
Ø 150-153 mm Top
1.495€
Nominal heat output
7.4 kW
Combustion type
Triple
Smoke
flue
Ø 150-153 mm Top
1.309€
If we haven’t answered your questions, don’t hesitate to contact us.
A fireplace is open and loses heat through the flue. An insert is closed, making better use of the heat, consuming less wood, and preventing smoke from entering the room. An insert is a closed appliance fitted into an open fireplace to improve its efficiency. It offers higher thermal performance and lower wood consumption.
We don’t carry out installations, so we don’t give fixed prices: the cost depends on the professional who does the job, how difficult the installation is (size of the opening, adapting the fireplace, condition of the flue) and the service included. We recommend asking a professional installer for a quote.
The fire is enclosed behind a glass door, preventing heat from escaping. A built-in fan distributes the warmth around the room, heating more effectively and faster than an open fireplace.
Yes. Insert, inset and cassette are different names for the same thing: a closed firebox that is built into an open fireplace or a masonry surround.
Yes, as long as the opening matches the model’s dimensions (given on each product page) and the flue is in good condition. At least 3 metres of vertical flue are needed and the cowl must be higher than the roof ridge. We recommend having it installed by a professional. You’ll find all the requirements in our installation guide.
Yes. For inserts built into a masonry surround, vents must be fitted at the top and bottom of the surround so that air can circulate. These vents are separate from the outside air intake.
It means the hot air can be carried through ducts to other rooms in the house. All our inserts can be ducted.
To provide the best experiences, we use technologies such as cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique identifiers on this site. Not consenting or withdrawing consent may adversely affect certain features and functions.